PRIME make Tubular Plate range of Batteries are designed and manufactured for better performance and long service life even under rigorous usage conditions.
TIPS ON CARE FOR YOUR BATTERY:
Always keep the battery top surface & terminals clean & dryf apply a thin coat of petroleum jelly over the terminals to protect them from corrosion.
Ensure all electrical connections are firm to avoid sparking & heating up.
Install the batteries in a well-ventilated area away from direct sunlight & fire.
Always use well-designed charger of reputed make.
Always keep the batteries charged promptly after use.
It is advisable to provide low battery alarm & auto / manual disconnect system to avoid deep discharge.
Maintain a logbook to record & monitor sp.gr & Voltage reading on a regular basis.
INTIAL CHARGING INSTRUCTIONS
Fill up the battery grade sulfuric acid of sp.gr.1.220@27degree C.
Leave the battery idle for 12 hours
Connect the battery to a DC charger and charge at the initial charging current rate.
Monitor & record the sp.gr, Temperature & Voltage for every 4 hours.
If the Electrolyte temperature rises above 50 degree C, stop charging.
Restart charging when temperature falls down to around 40 degree C.
Adjust the final sp.gr. to 1.250 at 27 dgree C.
CAUTION :
Keep away the battery from spark, open flame & cigarettes lighting. These can cause explosions. Avoid metallic contact over battery terminals for unnecessary short circuits.
NOTE :
Return used batteries to manufacture / dealer or any authorised smelters to save environment. Disposing these batteries in any other way is illegal
Copyright 2010 PRIMETECH ACCUMULATORS PVT. LTD. All Rights Reserved.
Always keep the battery top surface & terminals clean & dryf apply a thin coat of petroleum jelly over the terminals to protect them from corrosion.